Welcome to QuickLogic-FPGA-Toolchain’s documentation for QuickLogic Devices!¶
Symbiflow Installation Guide and Tutorial¶
This provides the details of the Symbiflow package installation and the various commands supported by the tool. It covers how to install Symbiflow on the Linux operating systems and the usage of the tool by going over a simple example.
System Requirements
Requirements |
Linux |
CentOS |
Ubuntu |
|---|---|---|---|
Processor |
Intel Xeon® or similar processors |
Intel Xeon or similar processors |
Intel Xeon or similar processors |
Ram Size: 2 GB or more
Free Hard-Disc space: 5GB or more
QLF-K4N8/QLF-K6N10 Device¶
This provides details about running designs using qlf-k4n8/qlf-k6n10 device on Symbiflow
- Symbiflow: Design flow (QLF-K4N8/QLF-K6N10)
- Supported Commands
- Design flow
- BRAM and DSP
- Online References
S3B Device¶
This provides the details of running designs and in-built RAMs/FIFOs/Multipliers in S3B.
- Symbiflow: Design flow (EOS-S3)
- Run design flow on a simple counter design (EOS-S3)
- Performing the Pre-Layout Simulation
- Performing Design Synthesis
- Running pack, Place and Route tools (EOS-S3)
- Performing the Post-Layout Simulation (verifying the configuration bits)
- Performing the Post-Layout Timing Simulation
- Generate the Jlink and openOCD file
- Generate the ASCII header file format
- Generate the Binary File format
- PCF Sample
- Hardware Limitations and Online References
- S3B Device